Section Properties

*   Non-standard, longer lead time

**  Nominal coating thickness

*** Minimum yield strength of steel

Smart Application

Besides its application in composite floors in multi-storey buildings and commercial establishments, it is extensively used for Mezzanine applications. Corrosion resistant coating makes it the best solution for typical applications like parking sheds, where our structural decking system provides better appearance to exposed ceilings.

Material Specifi cations

Our deck panel is manufactured from hot dipped zinc coated high strength steel with minimum 550 MPa yield strength and coating mass of Z275(min 275g/m2 total of zinc coating on both sides).The available thickness ranges from 0.70 mm to 1.2mm BMT(Base Metal Thickness). The steel conforms to AS1397 and BS EN 10147:2000.

Tested to Extreme Conditions

Deck panels have been subjected to rigorous tests such as slip block test, formwork tests including shear and bearing, full scale slab test, composite slab cycle test, fire rating test, formwork-air pressure test, formwork-four point load test and concentrated load test. These tests are carried out in the labs to ensure maximum performance and quality of our decking profiles. (Ref. figure 2.1 to 2.4)

Quality Assurance

Our steel sheets comply with major China standards and design standards adopted across Asia. Manufactured using high tensile steel, it is optimally configured and uses advanced design and construction method.

Span Table Formwork Stage