Product Introduction

Floor deck is the rolled and cold-formed galvanized steel sheet, mainly used as ermanent formwork, may also be used for other purposes.

The products are widely used in power plants, electric power equipment companies, automobile exhibition hall, steel structure workshop, cement warehouse, steel structure office, airport terminal, railway station, sports square, concert hall, grand theater, large supermarkets, logistics center, Olympic sports venues and other steel structure buildings.

Main features

1. Meet fast construction requirements of main steel structures.

2. Enhance rigidity of floor slabs, save the quantity of reinforcement and concrete required.

3. With high strength bearing capacity.

Usage method

The floor deck is laid and connected with the steel beam, and the end of the plate is welded with the steel beam through spot welding, and the middle is welded with the steel beam through fusion welding: When the beam distance is greater than 1.5m, the side joint of the steel bearing plate and the steel plate shall be fixed at the distance of 90 cm across (the minimum value), which is welded or self-tapping screws. In the cutting work of steel bearing plates at construction sites, all bevel edges, cutting angles, extra-long holes, etc., should use electric ion cutters to avoid damaging the surface coating treatment of steel plates. If oxygen acetylene is used for cutting, zinc powder anti-rust paint should be applied to the cutting edge to avoid corrosion. Fire blanket should be prepared at the cutting site to avoid sparks and slag caused by fire, and fire extinguishers should be provided at the scene for emergency needs.

Installation techniques 

Fire resistance time vs coverage depth of profile steel floor deck when it is not protected by the fireproof material under it:

FAQ

1. How to control the quality of your product?

a) Quality of the design: think about possible problems in advance and provide a high quality design solution.

b) Quality of the raw material: choose the qualified raw material

c) Quality of the production: precise manufacturing technique, experienced workers, strict quality inspection.

2.How about your lead time?

It will take 3-7 days for budget and design according to the drawings after receiving the

deposit. 20-40 days if there are some special sizes.

3. How can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment;

4.What can you buy from us?

sandwich panels,PUR sandwich panels,PIR Sandwich panel,cold storage sandwich panels,rock wool sandwich panels

5. How long is your warranty? What kind of after-sale service can you provide?

Our warranty is 1 years since the project done.

During the warranty time, if anything has problems, we will replace it.

If you can’t handle it, we will send engineer come to solve it without any charge.